· Display up to 28 inputs via 4 pages
· Blue backlight
· Gear Indicator
· 8 user defined alarms with warning text and lights
· User defined 5-character sensor input names
· User defined shift lights
· Shielded, low luster display for sunlight viewing
· Metric / Imperial Configurable

The IQ3 Display Dash can be utilized with any of Racepak's V-Net data loggers, providing a compact, fully programmable LCD digital dash for use in a variety of motorsports.

Progressive shift lights, eight warning lights and all inputs are easily programmable through the DataLink II software.

A single V-Net cable is routed to the rear of the dash, providing power and access to all sensor information transmitted to the data logger. Up to 24 different sensor inputs may be displayed on a total of four programmable pages. The blue backlight provides excellent viewing for both daylight and nighttime usage, while the low luster display screen provides excellent protection against scratches.

· 4 Screens / 20 Programmable Displays
· Plug-n-Play Installation
· Warning Lights / Function Buttons
· Command Center for A Shift Light
· Minimum / Maximum Read Outs
· Adjustable Lighting for Night Time Use

The Street Dash has all the amenities needed on a street-driven vehicle. Through a combination of your existing sensors and those included in the kit, this dash will provide you with the ability to display engine RPM, speedometer, odometer, water and oil temperature, oil pressure, battery voltage, and fuel level. It has internal indicator lights for such items as low oil pressure, high water temperature, turn signals, high beam, and parking brake. Additional functions can be displayed with the purchase of the appropriate V-Net sensor and module combination. A relay for an electric fan controller, and a minimum/maximum recall function, are included in the Street Dash kit.

UDX dashes are capable of displaying up to 21 different functions. There are five numeric displays, plus the engine RPM sweep bar, on each of the four screen ‘pages’. Scrolling from one page to the next is accomplished with the push of a button. The 7.25” x 2.62” LCD screen is backlit for night time operation. Each dash has output for a shift light, and shift point programming is done right on the screen. Warning lights are located on each side of the display screen. You have the ability to assign these high or low threshold alarms to your choice of monitored functions. The buttons at the bottom of the panel are used to scroll through the screen pages as well as to activate various functions. Additional sensors can be added by using the popular individual V-Net sensor and modules

Overall dimensions of the UDX bezel are 4.0” tall and 10.2” wide. It will stand out .750” from the mounting surface. The dash can be mounted against any flat panel which permits a depth of 2.00 inches behind the mounting surface for clearance of the dash and its rear mounted V-Net cable. The dash weighs a mere 1.3 pounds.