HOT TACH GAUGES
The Hot Tach series of gauges are much like our Avenger series. They were designed for a specific market, personal watercraft in this case, and consist of three different versions. Unlike the Avengers, the looks of the gauges are all quite similar, with only the functions they perform determining their differences.
Hot
Tach II
The
Hot Tach II sets the stage for the Hot Tach III and Hot Tach Pro. It is the
foundation upon which the other two are built. This 2 7/16” square faced gauge
is capable of displaying multiple functions on its LCD screen. These functions
include engine RPM and two exhaust gas temperatures. In addition to displaying
these functions it is also possible to set alarm levels on each of the channels.
A warning light will flash whenever a maximum level is exceeded and any channel.
Viewing the RPM and EGT data is accomplished by scrolling through the channels
on the screen. This is done using the button on the gauge, or an optional
remote thumb switch.
Data
displayed on the Hot Tach II can also be recalled and played back after the
engine has been shut down. Up to six minutes of recall/playback is available.
.
All
Hot Tach gauges require a 12 volt DC power source, and they are backlit for
night time operation. The gauges are intended for dash mount and require a
2 1/16” OD round hole. All prices are based on the gauge being configured
at the time of purchase. Retrofitting modifications or upgrades at a later
date may increase the cost of the gauge.
| Hot Tach II, gauge and wiring harness only | 400-KT-HT |
| Hot Tach II, gauge, wiring harness, remote switch, 2 EGT probes | 400-KT-HT-KIT |
Hot
Tach III
The
Hot Tach III is very similar to the Hot Tach II. It shares all of the same
features, the only difference being the number of temperature channels it
can support. Where the Hot Tach II could handle two, the Hot Tach III can
accommodate up to three temperature channels.
| Hot Tach III, gauge and wiring harness only | 400-KT-HT3 |
| Hot Tach III, gauge, harness, remote switch, 2 EGT probes, water temp probe | 400-KT-HT3-KITW |
| Hot Tach III, gauge, harness, remote switch, 3 EGT probes | 400-KT-HT3-KIT |
