V-NET
MODULES WITH SENSORS, ANALOG
(NOT PRE-PROGRAMMED)
These
module and sensor combinations are the same as our V-Net
Modules with Sensors, Analog (Pre-Programmed) with the exception
that they have not been pre-programmed. In other words they have not been
assigned to a specific task. As an example, if you had a need for a module/sensor
combination to measure your carburetor fuel pressure up to 15 psi you would
choose the pre-assigned part number 220-VP-PT-CP15. But lets say that you
wanted to measure some other fluid line pressure in the same pressure range.
One for which there was not a pre-assigned module/sensor combo. You would
want to use the same module and sensor as used for the carb pressure, but
you wouldn’t want the download to indicate it was carb pressure. The answer
is to use one of these module/sensor combinations that have not been pre-assigned
to a specific task. They perform the same job as the pre-assigned module/sensors,
but these allow you to do the assignment programming yourself.
V-Net Module with Sensor, Analog (not pre-programmed)
| V-Net Module with Sensor, Pressure, 0-15 psi | 220-VS-15GVT |
| V-Net Module with Sensor, Pressure, 0-15 psi, Absolute | 220-VS-15AVT |
| V-Net Module with Sensor, Pressure, 0-75 psi | 220-VS-75GVT |
| V-Net Module with Sensor, Pressure, 0-150 psi | 220-VS-150GVT |
| V-Net Module with Sensor, Pressure, 0-300 psi | 220-VS-300GVT |
| V-Net Module with Sensor, Pressure, 0-500 psi | 220-VS-500GVT |
| V-Net Module with Sensor, Pressure, Brakes, 0-1500 psi | 220-VS-1500SET |
| V-Net Module with Sensor, Pressure, Nitrous, 0-1500 psi | 220-VS-1500SVT |
| V-Net Module with Sensor, Vacuum/Boost, 30-0-30 | 220-VS-VB |
| V-Net Module with Sensor, Temperature, 0-300°F | 220-VS-TR300 |
| V-Net Module with Sensor, Temperature, 0-600°F, Ring Type | 220-VS-TC-RT6 |
| V-Net Module with Sensor, Temperature, 0-1800°F, Ring Type | 220-VS-TC-RT18 |
| V-Net Module with Sensor, Temperature, 0-600°F, Right Angle Closed Tip | 220-VS-TC-RC6 |
| V-Net Module with Sensor, Temperature, 0-600°F, Right Angle Open Tip | 220-VS-TC-RO6 |
| V-Net Module with Sensor, Temperature, 0-1800°F, Right Angle Open Tip | 220-VS-TC-RO18 |
| V-Net Module with Sensor, Temperature, 0-600°F, Straight Closed Tip | 220-VS-TC-SC6 |
| V-Net Module with Sensor, Temperature, 0-600°F, Straight Open Tip | 220-VS-TC-SO6 |
| V-Net Module with Sensor, Temperature, 0-1800°F, Straight Open Tip | 220-VS-TC-SO18 |
Notes
about temperature sensors:
RingType
indicates that these are the type of sensor that is ‘sandwiched’ between the
head of a bolt or nut and a piece of metal to measure the temperature if the
metal, such as with cylinder head temperature.
Right
Angle and Straight are probe type sensors. They indicate whether the probe
is bent at a 90° angle, or protrudes straight out of the hole it is inserted
into.
Closed Tip and Open Tip are also probe type sensors. Closed Tip probes are used in application where the tip of the probe is immersed in a liquid (ie: radiotor, dry sump tank oil temp). Open Tip probes are used when there is not liquid to wick up into the probe (ie: exhasut gas temperatures, intake manifold temperatures).