V-NET
MODULES WITH SENSORS, ANALOG
(PRE-PROGRAMMED)
For
a function to be monitored on the V-Net the signal from that function must
pass through two components, a sensor and a module. The sensor is the unit
that actually measures the input from the function (ie: pressure, temperature,
movement, RPM), while the modules serves the purpose of converting and ‘conditioning’
the signal from the sensor so it can be transmitted over the V-Net cable.
Although they can be purchased separately, for your convenience we have assembled
a selection of sensors and modules that are commonly used in conjunction with
each other. These module/sensor assemblies are pre-programmed for the uses
indicated. They are ready to plug & play.
The
following modules are equipped with sensors for analog functions. For digital
functions please see V-Net Modules with Sensor, Digital.
If
a module/sensor combination for your application is not shown below you might
want to check out the combo sets that have not been pre-programmed, V-Net
Modules with Sensors, Analog (Not Pre-Programmed)
If you wish to purchase the modules or sensors below separately please see Modules Only or Sensors.
V-Net Module with Sensor, Analog
| Pressure, Oil, 0-150 psi | 220-VP-PT-OP150 |
| Pressure, Fuel, Carburetor, 0-15 psi | 220-VP-PT-CP15 |
| Pressure, Fuel, Pump, 0-75 psi | 220-VP-PT-PP075 |
| Pressure, Fuel, Pump, 0-150 psi | 220-VP-PT-PP150 |
| Pressure, Fuel, Pump, 0-300 psi | 220-VP-PT-PP300 |
| Pressure, Fuel, Pump, 0-500 psi | 220-VP-PT-PP500 |
| Pressure, Fuel, Nozzle, 0-150 psi | 220-VP-PT-NP150 |
| Pressure, Fuel, Nozzle, 0-300 psi | 220-VP-PT-NP300 |
| Pressure, Fuel, Nozzle, 0-500 psi | 220-VP-PT-NP500 |
| Pressure, Nitrous Bottle #1, 0-1500 psi | 220-VP-PT-N1 |
| Pressure, Nitrous Bottle #2, 0-1500 psi | 220-VP-PT-N2 |
| Pressure, Nitrous Fuel #1, 0-15 psi | 220-VP-PT-NF115 |
| Pressure, Nitrous Fuel #2, 0-15 psi | 220-VP-PT-NF215 |
| Pressure, Transmission, 0-300 psi | 220-VP-PT-TP300 |
| Pressure, Brakes, 0-1500 psi | 220-VP-PT-B1500 |
| Pressure, Manifold Boost, 0-75 psi | 220-VP-PT-BST75 |
| Pressure, Absolute, Manifold (MAP), 0-30 psi | 220-VP-PT-MAP |
| Pressure/Vacuum, Manifold, 30-0-30 | 220-VP-PT-BVAC |
| Pressure Differential, 0-40 inches of water | 220-VP-PT-PD145 |
| Vacuum, Pan, 0-30 In. hg | 220-VP-PT-PVAC |
| G-Meter with Mount Box | 220-VP-GM |
| Temperature, Water, 0-300°F | 220-VP-TR-WATER |
| Temperature, Oil, 0-300°F | 220-VP-TR-OIL |
| Temperature, Transmission, 0-300°F | 220-VP-TR-TRANS |
| Temperature, Cylinder Head, 0-600°F | 220-VP-TC-HEAD |
| Temperature, Exhaust Gas, Single Probe, 0-1800°F | 220-VP-TC-EGT |
| Temperature, Exhaust Gas, 4 Probes with Junction Box, 1357 | 220-VP-TC-1357 |
| Temperature, Exhaust Gas, 4 Probes with Junction Box, 2468 | 220-VP-TC-2468 |
| Temperature, Exhaust Gas, 4 Probes with Junction Box, 1234 | 220-VP-TC-1234 |
| Temperature, Exhaust Gas, 4 Probes with Junction Box, 5678 | 220-VP-TC-5678 |
Note: the EGT junction
box sets are ordered by the cylinder back sequence they serve.
Thermocouple lengths are
18”, 23”, 28”, & 33”. Cable from junction box to V-Net module is 36” in
length.