V-NET
MODULES ONLY / NO SENSORS
These
are the same modules as used with our analog and digital sensor/module combination
assemblies. The difference here being that these modules do not come equipped
with the sensor, nor have they been pre-programmed for any specific use. They
must be fitted with the proper sensor and programmed before they can be connected
to the V-Net. If you are in need of a module and sensor combination, rather
than just the individual modules seen here, it might be worth your time to
view the pre-packaged and pre-programmed module/sensor assembly pages, V-Net Modules with Sensors, Analog
or V-Net Modules with Sensors, Digital.
V-Net Modules Only, Digital
| V-Net Module Only, Inductive Spark Pickup Input | 230-VM-INDRPM |
| V-Net Module Only, Zero Crossing Input | 230-VM-ZX-1 |
| V-Net Module Only, Contact Closure Input | 230-VM-CC-1 |
| V-Net Module Only, Flow Meter Input | 230-VM-FLOW |
| V-Net Module Only, Three Channel Digital Input | 230-VM-3RPM |
| V-Net Module Only, Four Channel Digital Output | 230-VM-4DIGOUT |
| V-Net Module Only, Event Marker Input, Switch Closure | 230-VM-EVENT |
V-Net Modules Only, Analog
| V-Net Module Only, Voltage, 0-5 volt input, 5 volt output | 230-VM-AN-5V |
| V-Net Module Only, Voltage, 0-5 volt input, 12 volt output | 230-VM-AN-12V |
| V-Net Module Only, NGK Air/Fuel Sensor Input | 230-VM-AF |
| V-Net Module Only, Pressure, 5 volt | 230-VM-PT-5V |
| V-Net Module Only, Throttle Position | 230-VM-TPS |
| V-Net Module Only, Temperature, 0-300°F | 230-VM-TR-300 |
| (For use with Racepak sensor #810-TR-300 only) | |
| V-Net Module Only, Temperature, 0-600°F (No EGT) | 230-VM-TC-600 |
| (For use with type K thermocouples
only) |
|
| V-Net Module Only, Temperature, 0-1800°F (EGT) |
230-VM-TC1800 |
| (For use with type K thermocouples
only) |