Analog: 8 hard-wired
Digital: 4 hard-wired
V-Net: up to 100 per second
Analog: up to 1000 per second
Digital: RPM and switch contacts up to 100 per second
Digital: Timing intervals within 1/1000th of a second
SD memory card
Recording time depends on number of channels monitored and sample rates
Longitudinal g-meter (acceleration and deceleration)
Lateral g-meter (side-to-side motion)
5.350” (L) 5.5550” (W) 1.215” (H)
The G2X-Pro builds on the G2X’s already impressive capabilities by allowing the user to monitor up to 71 channels, while providing lap and segment timing along with speed and track mapping functions through the use of GPS information. The G2X-Pro utilizes our exclusive V-Net plug and play technology which allows the data from up to 59 sensors to be transmitted via a single cable to the data recorder. The G2X-Pro brings with it more hardware in the form of our steering position, throttle position, and brake pressure package. This package provides easy installation through the use of a module that permits the user to terminate these sensor cables to the desired length. A single cable then links the module to the G2X-Pro recorder. Suspension and ride height data may also be obtained by purchasing the appropriate shock and ride height sensor package, which installs and transmits data in the same method as the steering/throttle/brake package. In addition, any Racpak sensor may be used with the G2X Pro.
The optional G2X-Pro display dash provides the ability to set start/finish from the dash, thus providing lap time and lap number without the use of trackside transmitters, onboard beacon receivers, or wheel speed sensors. In addition, the display dash can provide lap gain/loss, gear indicator, number of satellites, progressive shift light, battery voltage, speed, acceleration/lateral G-force, and engine RPM (with the appropriate tach signal). The dash also allows display of data obtained from external sensors.