|
|
Air Fuel Sensor Packages and Components  Racepak has an excellent selection of A/F controllers and sensors created specifically for tuning race engines. Each of these 2 and 4 channel controllers are designed to be connected to the V-Net cable of Racepak V-series recorders. All sensors have a 13” pigtail cable, and the controller has a 37” cable for attachment to the sensor. These lengths cannot be altered. Controllers are ordered by cylinder bank layout.
Racepak A/F sensors are compatible with either gasoline or methanol fueled engines. Gasoline application will display A/F ratios between 9.55:1 and 20:1, while methanol is shown from 4.22:1 to 8.7:1. Please specify the type of fuel you will be using when ordering. Each sensor includes one weldment and plug.
Air/Fuel sensors can be used with all Vnet products and can run on 12-18 volt battery systems. |
Air/Fuel Controllers (Sensors must be ordered separately except for 220-VM-AF1)
| AF-1™ Single Channel Controller |
220-VM-AF1 |
4 Channel Controller, Cylinders 1, 3, 5, 7
(For use on 2, 4, 6, 8 cylinder bank of V8, i.e. GM & Mopar) |
220-VM-AF1357 |
4 Channel Controller, Cylinders 1, 3, 5, 7
(For use on 1, 3, 5, 7 cylinder bank of V8, i.e. GM & Mopar) |
220-VM-AF2468 |
4 Channel Controller, Cylinders 1, 2, 3, 4
(For use on 1, 2, 3, 4 cylinder bank of V8, i.e. Ford) |
220-VM-AF1234 |
4 Channel Controller, Cylinders 5, 6, 7, 8
(For use on 5, 6, 7, 8 cylinder bank of V8, i.e. Ford) |
220-VM-AF5678 |
| Air/Fuel Sensor Only (new style, for 220-VM-AF-series)
|
810-SN-AFAMP |
| Air/Fuel Sensor Only (old style, for 220-VM-LS-series)
|
810-SN-AFLSU |
Air/Fuel Weldment & Plug
(Weldments are included with purchase of controller) |
810-TX-AFWLDP |
| Air/Fuel Harness ‘A’ (Gray), w/ heater wires |
280-CA-LSUA |
| Air/Fuel Harness ‘B’ (Black) |
280-CA-LSUB |
| |
|
Single Channel VNet A/F Module
(For use with 890-KT-AFX or user-supplied 0-5v sensor) |
230-VM-AF |
|
