The Street Dash has all the amenities needed on a street-driven vehicle. Through a combination of your existing sensors and those included in the kit, this dash will provide you with the ability to display engine RPM, speedometer, odometer, water and oil temperature, oil pressure, battery voltage, and fuel level. It has internal indicator lights for such items as low oil pressure, high water temperature, turn signals, high beam, and parking brake. Additional functions can be displayed with the purchase of the appropriate V-Net sensor and module combination. A relay for an electric fan controller, and a minimum/maximum recall function, are included in the Street Dash kit.

The Replay Dash is another stand-alone instrument. In addition to providing real time display this dash can store up to 10 minutes of memory for replay on the dash. The Replay Dash kit includes a wire loom and sensors for engine RPM, water temperature, oil pressure, and battery voltage. Sensors for monitoring other function must be purchased as options.

Unlike the first two versions, the Display Only dash is designed to be used as an add on instrument for V-series recorders. It will display any function that is being monitored by the recorder to which it is attached.

UDX dashes are capable of displaying up to 21 different functions. There are five numeric displays, plus the engine RPM sweep bar, on each of the four screen ‘pages’. Scrolling from one page to the next is accomplished with the push of a button. The 7.25” x 2.62” LCD screen is backlit for night time operation. Each dash has output for a shift light, and shift point programming is done right on the screen. Warning lights are located on each side of the display screen. You have the ability to assign these high or low threshold alarms to your choice of monitored functions. The buttons at the bottom of the panel are used to scroll through the screen pages as well as to activate various functions. Additional sensors can be added by using the popular individual V-Net sensor and modules

Overall dimensions of the UDX bezel are 4.0” tall and 10.2” wide. It will stand out .750” from the mounting surface. The dash can be mounted against any flat panel which permits a depth of 2.00 inches behind the mounting surface for clearance of the dash and its rear mounted V-Net cable. The dash weighs a mere 1.3 pounds.