Racepak.com

Hey, I am putting together a component list.

Car is '79 Camaro, 540 BBC blown alky.

As I understand V300SD is the way to go.

What is the best way to hook up boost/fuel/oil pressure?

Thank You,
Partel from Estonia, Europe

Partel,

I would use what we a call a transducer box setup with the V300SD recorder. The transducer box can hold up to 4 sensors (pressure/Vacuum) and only has one connector coming out of the box back to the main line of the recorder insted of having a cable for each sensor. See attached picture. The transducer box is typically mounted on the firewall and you just need to route the pressure lines to the appropriate port on the box.

If you have any questions let me know,

Donny