Racepak.com • View topic - Read/Send to G2X problem

View unanswered posts | View active topics

Board index » G2X and G2X Pro

All times are UTC

Read/Send to G2X problem

Moderators: tim@racepak, todd@racepak, admin

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

bvanepps

Post subject: Read/Send to G2X problem

Posted: Tue May 04, 2010 1:51 am

Joined: Tue Jul 15, 2008 8:09 pm
Posts: 47
Location: Sothern Florida, USA

Using Win7 Professional x64 and Datalink3.6 running as Vista Service Pack2

I open G2XConfig then Right Click on G2X Module or Wheel Speed and I can both Read and Send Configuration to the Red G2X Unit. If I do this with the Display Dash I get an error as shown in the Jpg attached. The G2XConfig File has been changed to set predictive Lap Time on Display 1.

Attachment:

G2XError1.zip [20.17 KiB]
Downloaded 125 times

Attachments:

G2XError1.zip [20.17 KiB]
Downloaded 121 times

ERROR1.JPG [ 13.51 KiB | Viewed 901 times ]

_________________
Bob Van Epps
bob@vaneppsmotorsports.com
Racepak Dealer

Top

bvanepps

Post subject: Re: Read/Send to G2X problem

Posted: Tue May 04, 2010 2:23 am

Joined: Tue Jul 15, 2008 8:09 pm
Posts: 47
Location: Sothern Florida, USA

Just realized what my problem could be. The dash has to be connected to the G2X unit. Tried it and it works fine. I thought that all the info was held in the Base unit and that the dash was just an output device. Guess not.

Sorry if I wasted anyones time on this.

Bob

_________________
Bob Van Epps
bob@vaneppsmotorsports.com
Racepak Dealer

Top

tim@racepak

Post subject: Re: Read/Send to G2X problem

Posted: Tue May 04, 2010 12:43 pm

Joined: Mon Oct 29, 2007 12:02 pm
Posts: 1474

No problem...never hurts to post the questions for others to see. The dash is viewed the same as an external sensor, by the config file..since it is connected to the same Vnet input as the sensors.

Thanks,
Tim

Top

Page 1 of 1

[ 3 posts ]

Board index » G2X and G2X Pro

All times are UTC

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum