Here is my question regarding the ReplayXD camera and link with IQ3 (TIM
: I already sent that question to you through Cameron):
THE PERFECT SET-UP would be this: The camera is triggered by the IQ3, that means that it powers up the camera and starts the recording. When the IQ3 stops recording, it also stops the camera from recording and it shuts it off. Power must come from the Vnet module/IQ3. So there is no need to remove the camera from its location to recharge it and no need to set it up (field of view) each time we replace it after recharging.
With this set-up, we would be able to just remove the SD card from the camera and SD card from the IQ3, upload data and movie, sync it and start analyzing the whole thing. We would never have to think about the cameras... We have lots to do between sessions (road racing) and not lots of time (not a pro racer with a big team here) to play around with such things.
If it is not possible to send power to the camera, next thing would be to leave us the opportunity to hard wire it ourselves through the battery compartment. Not ideal, but a world better than to recharge it.
But I don’t see how you would not be able to send power through the USB plug in the camera. But I'm no electronic engineer...